7.6 KiB
% Exception Safety
Although programs should use unwinding sparingly, there's a lot of code that can panic. If you unwrap a None, index out of bounds, or divide by 0, your program will panic. On debug builds, every arithmetic operation can panic if it overflows. Unless you are very careful and tightly control what code runs, pretty much everything can unwind, and you need to be ready for it.
Being ready for unwinding is often referred to as exception safety in the broader programming world. In Rust, there are two levels of exception safety that one may concern themselves with:
-
In unsafe code, we must be exception safe to the point of not violating memory safety. We'll call this minimal exception safety.
-
In safe code, it is good to be exception safe to the point of your program doing the right thing. We'll call this maximal exception safety.
As is the case in many places in Rust, Unsafe code must be ready to deal with bad Safe code when it comes to unwinding. Code that transiently creates unsound states must be careful that a panic does not cause that state to be used. Generally this means ensuring that only non-panicking code is run while these states exist, or making a guard that cleans up the state in the case of a panic. This does not necessarily mean that the state a panic witnesses is a fully coherent state. We need only guarantee that it's a safe state.
Most Unsafe code is leaf-like, and therefore fairly easy to make exception-safe. It controls all the code that runs, and most of that code can't panic. However it is not uncommon for Unsafe code to work with arrays of temporarily uninitialized data while repeatedly invoking caller-provided code. Such code needs to be careful and consider exception safety.
Vec::push_all
Vec::push_all is a temporary hack to get extending a Vec by a slice reliably
effecient without specialization. Here's a simple implementation:
impl<T: Clone> Vec<T> {
fn push_all(&mut self, to_push: &[T]) {
self.reserve(to_push.len());
unsafe {
// can't overflow because we just reserved this
self.set_len(self.len() + to_push.len());
for (i, x) in to_push.iter().enumerate() {
self.ptr().offset(i as isize).write(x.clone());
}
}
}
}
We bypass push in order to avoid redundant capacity and len checks on the
Vec that we definitely know has capacity. The logic is totally correct, except
there's a subtle problem with our code: it's not exception-safe! set_len,
offset, and write are all fine, but clone is the panic bomb we over-
looked.
Clone is completely out of our control, and is totally free to panic. If it does, our function will exit early with the length of the Vec set too large. If the Vec is looked at or dropped, uninitialized memory will be read!
The fix in this case is fairly simple. If we want to guarantee that the values we did clone are dropped we can set the len in the loop. If we just want to guarantee that uninitialized memory can't be observed, we can set the len after the loop.
BinaryHeap::sift_up
Bubbling an element up a heap is a bit more complicated than extending a Vec. The pseudocode is as follows:
bubble_up(heap, index):
while index != 0 && heap[index] < heap[parent(index)]:
heap.swap(index, parent(index))
index = parent(index)
A literal transcription of this code to Rust is totally fine, but has an annoying
performance characteristic: the self element is swapped over and over again
uselessly. We would rather have the following:
bubble_up(heap, index):
let elem = heap[index]
while index != 0 && element < heap[parent(index)]:
heap[index] = heap[parent(index)]
index = parent(index)
heap[index] = elem
This code ensures that each element is copied as little as possible (it is in fact necessary that elem be copied twice in general). However it now exposes some exception safety trouble! At all times, there exists two copies of one value. If we panic in this function something will be double-dropped. Unfortunately, we also don't have full control of the code: that comparison is user-defined!
Unlike Vec, the fix isn't as easy here. One option is to break the user-defined code and the unsafe code into two separate phases:
bubble_up(heap, index):
let end_index = index;
while end_index != 0 && heap[end_index] < heap[parent(end_index)]:
end_index = parent(end_index)
let elem = heap[index]
while index != end_index:
heap[index] = heap[parent(index)]
index = parent(index)
heap[index] = elem
If the user-defined code blows up, that's no problem anymore, because we haven't actually touched the state of the heap yet. Once we do start messing with the heap, we're working with only data and functions that we trust, so there's no concern of panics.
Perhaps you're not happy with this design. Surely, it's cheating! And we have to do the complex heap traversal twice! Alright, let's bite the bullet. Let's intermix untrusted and unsafe code for reals.
If Rust had try and finally like in Java, we could do the following:
bubble_up(heap, index):
let elem = heap[index]
try:
while index != 0 && element < heap[parent(index)]:
heap[index] = heap[parent(index)]
index = parent(index)
finally:
heap[index] = elem
The basic idea is simple: if the comparison panics, we just toss the loose element in the logically uninitialized index and bail out. Anyone who observes the heap will see a potentially inconsistent heap, but at least it won't cause any double-drops! If the algorithm terminates normally, then this operation happens to coincide precisely with the how we finish up regardless.
Sadly, Rust has no such construct, so we're going to need to roll our own! The way to do this is to store the algorithm's state in a separate struct with a destructor for the "finally" logic. Whether we panic or not, that destructor will run and clean up after us.
struct Hole<'a, T: 'a> {
data: &'a mut [T],
/// `elt` is always `Some` from new until drop.
elt: Option<T>,
pos: usize,
}
impl<'a, T> Hole<'a, T> {
fn new(data: &'a mut [T], pos: usize) -> Self {
unsafe {
let elt = ptr::read(&data[pos]);
Hole {
data: data,
elt: Some(elt),
pos: pos,
}
}
}
fn pos(&self) -> usize { self.pos }
fn removed(&self) -> &T { self.elt.as_ref().unwrap() }
unsafe fn get(&self, index: usize) -> &T { &self.data[index] }
unsafe fn move_to(&mut self, index: usize) {
let index_ptr: *const _ = &self.data[index];
let hole_ptr = &mut self.data[self.pos];
ptr::copy_nonoverlapping(index_ptr, hole_ptr, 1);
self.pos = index;
}
}
impl<'a, T> Drop for Hole<'a, T> {
fn drop(&mut self) {
// fill the hole again
unsafe {
let pos = self.pos;
ptr::write(&mut self.data[pos], self.elt.take().unwrap());
}
}
}
impl<T: Ord> BinaryHeap<T> {
fn sift_up(&mut self, pos: usize) {
unsafe {
// Take out the value at `pos` and create a hole.
let mut hole = Hole::new(&mut self.data, pos);
while hole.pos() != 0 {
let parent = parent(hole.pos());
if hole.removed() <= hole.get(parent) { break }
hole.move_to(parent);
}
// Hole will be unconditionally filled here; panic or not!
}
}
}